Energy saving techniques for wall mounted boilers

As winter approaches, the issue of household heating has once again become a topic of concern for the people. With the continuous improvement of people's living standards, they have put forward higher requirements for the quality of life and living environment. Home gas wall mounted boilers, with their characteristics of independent heating, energy-saving heating, intelligent temperature control, and fashionable and exquisite design, have gradually replaced centralized heating and become the best choice for winter heating in mid to high end households. Especially the condensing wall mounted gas stove, as a new and comfortable environmentally friendly product, has gradually been favored by more families pursuing high-quality life. But there are also some tips when using wall mounted boilers in daily life, and using these tips can avoid energy waste.

1. The temperature setting for domestic water should not exceed 50 ℃. The water temperature for bathing in winter is generally around 42 ℃, while in summer it is around 37 ℃. The anti scaling characteristics of wall mounted boilers also determine that when the set water temperature for domestic water exceeds 50 ℃, the possibility of water scaling will greatly increase. The generation of scale will inevitably affect the heat transfer efficiency of the equipment.

2. Try to minimize the number of times the faucet is turned on and off during the shower process, because every time the hot water faucet is turned on and off, the boiler needs to start again. Before reheating the water to the desired temperature, a regular boiler has at least 7 seconds, during which a large amount of cold water is wasted and gas is wasted. It is recommended that you choose products with high brand awareness, which not only have short boiler start-up time, but also are energy-saving and environmentally friendly. Taking the Hampton condensing wall mounted boiler as an example, this machine adopts advanced condensing technology, which can recover exhaust heat, is environmentally friendly and energy-saving, and has comfortable hot water supply in as little as 5 seconds during daily use.

3. When heating, do not heat the room temperature too high. When the temperature difference between indoors and outdoors is too large, people are prone to catching a cold. And according to statistics, heating a room to 19 ℃ consumes 10% more energy than heating a room to 18 ℃.

4. Turn off or lower the temperature of unoccupied rooms.

5. It is not advisable to turn off the wall mounted boiler when there is no one at home during the day. Simply set the temperature to the lowest setting. Many office workers are accustomed to turning off the wall mounted boiler when there is no one at home, and then placing it in a high position for rapid heating after work. This practice is very unscientific. After cooling the room for 9 hours, due to the large temperature difference between the room temperature and the set temperature, the boiler needs to run on high fire, which not only does not save energy, but also wastes more gas. The scientific approach is to slightly lower the temperature of the room through the room thermostat. If there is no room thermostat, the heating temperature of the wall mounted boiler can be directly set to the lowest, during which the boiler will intermittently burn on low fire to compensate for the heat loss in the room. This not only saves energy but also provides a comfortable temperature right after work.

6. Entering the nighttime state, the room temperature can be adjusted to 2-3 ℃ lower than the daytime temperature, which also helps to save energy

7. The energy-saving companion of using wall mounted boilers (room temperature controllers, outdoor temperature sensors, etc.) can effectively save about 25% energy.

8. Pay attention to the maintenance of wall mounted boilers: Wall mounted boilers are complex equipment that integrates water collection, electricity, and gas. Scale and carbon deposits in the main heat exchanger can reduce the heat transfer efficiency. In order to extend the service life of wall mounted boilers and effectively save energy, users should maintain them once a year. According to statistics, after the warranty period, if users pay attention to maintenance, they can save about 6% of energy per year.